Traxxas Slash 4x4 improve your steering

This episode will address how to tighten up your steering by upgrading the steering bell crank, servo horn and servo. I do a step by step installation of the Hot Racing aluminum steering bell crank with an adjustable servo saver, and talk about the aluminum servo horn from Team Losi Racing. I also suggest a couple of upgrade servos from Savox and Xpert.

Here are some links:

Hot Racing steering bell crank w/adjustable servo saver:
http://www.hot-racing.com/index.cgi?p...

TLR aluminum servo horn:
http://www.tlracing.com/Products/Defa...
ATTENTION: The screw hole in this servo horn is 2,5 mm diameter while the original screw is 3mm. This is how I solved it: Before I installed the servo horn, I forced the original screw (link between servo horn and servo link) into the servo horn. I did this several times until the screw went a little lighter through the hole. I was very careful not to strip the screw. Added a lot of pressure to the screwdriver as I was working the screw in. This turned out great and the screw almost doesn't need loctite (I added loctite anyways). Sorry for forgetting to mention this in the video!!

Savox servo cheap:
https://www.savoxusa.com/Savox_SW0231...

Savox servo hi end:
https://www.savoxusa.com/product_p/sa...

Hitech non waterproof servo:
http://hitecrcd.com/products/servos/u...

Xpert hi end servo:
http://xpert-rc.com/product/wr-4401/