Скачать или смотреть Great product - BOSCH BTH014

Great product - BOSCH BTH014#0-1/4 In. T-Handle Tap Wrench
Amazon Product Link: Link: http://amazon.com/dp/B07GRJMSDQ/?tag=hanam...

T-Handle Tap Wrench design – used to securely hold taps to be turned by hand
Adjustable jaws – engineered to be self-equalizing
Secure T-handle – stays in place due to spring tension
Heat-treated carbon steel construction – designed to be rust and tarnish resistant
The Bosch T-Handle tap wrench is used to securely hold taps to be turned by hand. It features adjustable wrench jaws that are self-equalizing. A spring tension holds the T-Handle in place. The self-centering hardened steel jaws provide a positive grip. The wrench is designed to ensure easy starting, and it is ideal to promote accurate threading. Made from heat-treated carbon steel, this is a rust- and tarnish-resistant tool.
Top reviews from the United States
Saved the day!
Changing spark plugs, I ran into a cross-threaded ignition coil bolt that snapped flush when reinstalling. I used this tap handle with a Ryobi #1 screw extractor ('EZ out') and it worked beautifully. I did notice some other comments that this had trouble holding smaller bits. The flats on this extractor measure 3.30mm, and were a bit rounded because my adjustable wrench just couldn't hold tight enough. I dropped the extractor into this T-handle as far as it would go, tightened with a wrench and it held firm. This tap handle is solid enough to tap on it with a hammer to seat the extractor into the small hole I drilled. I went very slowly to hopefully avoid breaking the extractor... and about 5 min later, the broken bolt was out!