Скачать или смотреть Testing A Upgraded TM 416D NGRS | 432

Richard from our tech team talks about and demonstrates a customers upgraded TM 416D NGRS build.
Please find the full build description below.

If you like our videos then please like, subscribe and comment.

FPS Results 349 FPS (Measured On 0.20gr BB) & 270 FPS (Measured On 0.32gr BB)

Scope Of Work:
Install Lvl 6. AA 30k motor. laylax pin. R Hop Setup + Prometheus Purple Hop Rubber. Gate Titan Advanced Mosfet + Laylax Pin. 2x 2600mah 7.4v lipos extended versions. Deans Mod To Stock Contact Bars.

Installed
Level 1 - Power Spring & Rebuild
Full strip & rebuild
EagleSix M90 For NGRS
Level 2 - Hop Rubbers & Nubs
R Hop Setup
Level 3 - Tight Bore Barrel
Prometheus 6.03mm 275mm Tightbore Barrel
Level 4 - Gears & Bearings
Prometheus Normal Torque NGRS gear set
Prometheus 6mm Bearings
Level 5 - Piston Head & Spring Guide
Prometheus Piston Head New V2 M4 NGRS
Prometheus Spring Guide New v2 M4 NGRS
Level 6 - Cylinder Head and Cylinder
Prometheus Cylinder Type C
Prometheus Cylinder Head New V2 M4 NGRS

Extras
Gate Titan Advanced rear wired
Laylax Trigger Pin For TM M4 NGRS
AA 30k Torque Motor Long Type
Deans Mod To Stock Contact Bars
Prep 2x 2600mah 7.4v lipos (eXtended versions)

Tested On an 7.4v 2600mah Lipo on video.

This RIF was put through our "4 point testing" prior to dispatch.

Thank you for the opportunity to do this build for you. We always appreciate long term feedback on our builds good or bad.