OMNI TONEARM TENSION MOD - INSTALLATION

STEPS:

1. Remove the stylus, and unscrew the two screws on the headshell. (Using the 3MM ⊕ SCREWDRIVER)

2. Pass the tonearm wires through the slot on the C BUSH PART and slide it onto the tonearm, then put the headshell back on.

3. Remove the rubber bands and the linked screw from the tonearm base. (Using the M2.5 ⬣ HEX KEY)

4. Attach the TENSION SPRING PART to the tonearm base with the 3MM ⊕ SCREWDRIVER, and screw the opposite end to the C BUSH PART.

5. Remove the set screw on the counterweight and replace with the COUNTERWEIGHT SCREW. (Using the M1.5 ⬣ HEX KEY)

6. Put the stylus back on and adjust the weight using a stylus force scale.


SONG CREDIT:
“I Can Only Think of You” by Gwen McCrae


HAND TALENT AND SONG SELECTION:
Trisha Dueñas


VIDEO SHOOTING AND EDITING:
Tinysteppa