Pump Up the Volume I !!! Nissan Frontier - On Board Air III with 12v Hardwired Compressor

Adding a new compressor and hardwired cabling to power it. 6GA wiring and a new 500a switching relay to power up the bed-mounted junction board and auxiliary fuse block, and the Alpha-Romeo-Bravo - style compressor. 93 seconds to fill a 3 gallon air storage tank from 0PSI to 100PSI and autoshutdown from the air pressure control switch.

https://www.amazon.com/DIMAIER-Compre...
https://www.amazon.com/High-Output-Co...
Relay:
https://www.amazon.com/dp/B082HMDMLG?...

PS New Edit: I found a video comparison on-line that another YouTuber had done, showing the external differences between the branded and non-branded compressor housing, which, are notably, very minimal, he didn't rip his test subjects apart to have a look inside, but the branded unit had a recessed / countersunk bolt holding the connecting rod to the crank, the generic had a pin and circlip, which tends to reinforce the potential notion that though these MAY be possibly built in the same factory, they have different internals which could affect longevity and performance.