All the best of 80's surfboard design combined with a modern performance outline, welcome to the review of the Lost Surfboards Retro Ripper!
I have been riding the stock 5'11 x 19 1/4 x 2 7/16 Retro Ripper with Futures Fins.
I have been lucky enough to ride the Retro Ripper in a variety of conditions from pumping in open waves in Bali, to average junky waves at home, and the board seems to manage it all.
In the bigger stuff, the design tended more towards waves with a steeper open face, as in the bigger but flatter fuller stuff, the flat bottom and vee seemed to get a bit sticky. But this wasn't an issue in bigger cleaner/steeper waves, or when surfing in smaller waves 2-3ft.
I loved the volume up front that got you in nice and early and had a big board feel, but then jumping back on the winged pin tail and being able to jam the tail into some more critical surfing, and allowing the board to feel much looser!
From the www.lostsurfboards.com.au
Designed as an everyday utility board to semi-step up. A great travel board, that can handle some size, and a wide variety of conditions.
The target surfer for this board is once again, the guy who tends to rides wider, thicker, high volume, relaxed rocker boards in small, daily surf...and struggles to find a suitable board for bigger, better, or more challenging days.
Very well suited for solid East Coast hurricane and winter swells, crowded head high beach breaks, long winding points and really excels in strong offshore winds, or choppy, windy conditions.
Similar features to the RetroGun: Flat, stable deck with full, steep, low apex rails = Float, paddle power and edge control. Forward wide point outline to a wedged beak nose = Wave catching and drive. Low entry rocker with accelerated tail rocker.
Fast out the gate, yet turns tight in the pocket. Rolled vee in nose, flat under front foot, and a deep double concave vee cutting through the tail rocker. Slice though windchop and allow the higher volume to sit low in the water.
Winged round pin tail = A release point to keep the board loose. It quickens up turns in moderate surf, without being detrimental in larger waves. The overall look, feel and vibe is once again very reminiscent of boards I built for myself (and a few brave friends) in the ‘80’s, for surfing in better days from Trestles to Salt Creek, and down to Mexico.
A very user-friendly board, suited for surfers looking for a fast, fun, easy to paddle, alternative, that really works best when most hybrids are reaching their effective wave size limits. Adding to the fun, the RetroRipper comes standard with era specific, vintage ‘80’s “Mayhem”, ...Lost spiral and rail logos.
With the fins, I mainly used the F8 from the Futures Fins Legacy series:
The F8 Legacy Series Thruster is a large sized fin with a neutral template and balanced feel for all-around performance
• Template Category | Neutral (all-around, balanced)
• Construction | Honeycomb
• Size | Large (180 + lbs)
• Ride Number | Balanced
To stay up to date with all that we are doing on The Surfboard Guide, make sure you subscribe – but also check us out on:
www.Instagram.com/TheSurfboardGuide
Thanks for watching!
Информация по комментариям в разработке