How to Replace Wheel Bearing 2008-2012 Honda Accord

Buy Now!
New Wheel Bearing from 1AAuto.com http://1aau.to/ia/1AAXX00148
New Wheel Bearing Set from 1AAuto.com http://1aau.to/ia/1ASHS00861

This video shows you how to install a wheel bearing on your 2008-2012 Honda Accord. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

This repair was done on a 2010 Honda Accord LX-S 2.4L Coupe 2-Door FWD Manual and the process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord

Tools you will need:
• Impact Screwdriver http://1aau.to/oV/1AXAA00047
• Phillips Head Screwdriver http://1aau.to/oDS/1AXAA00013
• Pry Bar http://1aau.to/oie/1AXAA00020
• 10mm Socket http://1aau.to/ozn/1AXAA00017
• 12mm Socket http://1aau.to/oDP/1AXAA00015
• 17mm Socket http://1aau.to/oDP/1AXAA00015
• 19mm Socket
• 36mm Socket http://1aau.to/oD/1AAST00006
• Ball Joint Press
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. http://1aau.to/op/1AXAA00278
• Brake Caliper Hanger http://1aau.to/obv/1AXAA00439
• Hub Puller
• Pliers
• Side Cutters
• Snap Ring Pliers
• 1/4 Inch Ratchet http://1aau.to/ozn/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/oDP/1AXAA00015
• Torque Wrench http://1aau.to/otd/1AXAA00044
• Gloves http://1aau.to/oei/1AXSS00048
• Rust Penetrant
• Safety Glasses
• Chisel http://1aau.to/obV/1AXAA00055
• Hammer
• Pick http://1aau.to/ogy/1AXAA00037

Subscribe:    / @trq  

Check out our playlist:
Honda Accord 2008-12 8th Gen:    • Honda Accord 2008-12 8th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.