Wave soldering, JT Wave Soldering Maintenance,

Wave soldering Machine.
JT Wave Soldering Maintenance,
Wave soldering Working,
#smt #soldering #wavesoldering #pcbsoldering


How the Wave Soldering Machine Works
wave soldering machine manufacturers in india
wave soldering machine temperature
Wave soldering machine manufacturers

I. Wave soldering daily maintenance of the main content

1. Remove the residue in the tin pool, with a tin spoon will be all tin surface slag collection together, and add the reduction powder to restore the slag within the part of the broken tin. end of the above process, the tin furnace to return to the position.

2. with a rag dipped in glass water will protect the glass inside and outside the scrub clean.

3. with a hand brush dipped in detergent will be chain claws on the dirty brush clean, with a bamboo stick will be hidden in the chain claws and the black piece of dirt between the removal of clean.

4. The spray extraction hood filter removed with a clean detergent clean.

II. Wave soldering weekly maintenance of the main content

1. Clear the tin furnace wave parts.

2. with clean rags into the end, PCB inductor wipe clean.

3. Erase the two waves of tin pump bearing dirty lubricant, with oil gun will be new oil through the oil spray pressure into the bearing.

4. remove the rosin oil area, heating area of the extraction hose, the internal structure of the rosin oil and other dirty cleaning.

5. remove the body shell, base, furnace walls, rosin oil cylinder and wash claws.

III. Wave soldering monthly maintenance of the main content

1. Clear rosin oil nozzle slide, position distance sensor, and give the slide coated with new lubricant.

2. Remove the control cabinet on the cooling fan, will be cleaned and air-dried isolation grille and then again on.

3. Add new lubricant to the transmission chain; clean the transmission chain rotation motor as well as the mesh cover.

4. Remove the rosin oil nozzle, test the internal structure of the sealing rubber ring is damaged.

5. the whole two hair wave machine up and down, clean the lower end of the tin pump tin slag and other dirt, dirty lubricant bearings, clean motor mesh cover, with an oil gun will be new oil through the nozzle pressed into the bearings.