Скачать или смотреть Dji Phantom 3 Battery Charger

How to charge your dji Phantom 3 Battery with a multi chemistry charger.
The original charger of the Phantom 3 is a simple power supply of 17.5 Volt and 5,7 Amp (phantom 3 Pro). All you need to do, is to match these parameters with your multi chemistry charger. So you need a dc continue voltage of near 17.5 volt and the mode you need to select on your charger is PB because PB mode send pure DC voltage in continue just like the phantom charger.

Now, you have to set the pb mode to 9 cells to get 18 volt and in the video I set amp to 5.2 but you can set it at 5.7, just like the charger of the phantom 3 pro.

I use a traxxas charge lead. https://traxxas.com/products/parts/2946
And I mark the polarity of my phantom 3 Battery.
Before start charging, the phantom battery mus be ''on'' because charger need to check the presence of a battery by checking the voltage outpout of that Batt.

At 5.2 amp, battery take aproximately 47 minutes to charge.

DO NOT INVERT POLARITY OR BATTERY MAY BE DAMAGED.