AUDI A3 TT R8 CRUISE CONTROL FITTED FOR JUST £58! FULL DIY GUIDE

Support the channel and get ODBeleven here;
https://obdeleven.com?aff=2089&utm_source=affiliate&utm_medium=afltly

In this video I share with you the tools, parts and process involved in retrofitting cruise control to your Mk2 Audi A3, Mk2 Audi TT and Mk1 Audi R8.
This guide should apply to nearly all vehicles in the UK with a multi-function steering wheel and trip computer but there will be some basic models it doesn't apply to as these may require a wire to be added to the engine ECU.

*THIS GUIDE DOESN'T APPLY TO MQB PLATFORM CARS i.e. MK3 A3 & TT + Mk3 R8*

Parts numbers are as follows (there maybe older versions that have been superceded by these);
A3 and S3 : stalk 8P0 953 513 F 9B9 trim : 8P0 953 512A 6PS
TT and R8 : stalk : 8P0 953 513 F 9B9 trim : 8J0 953 512A 6PS

PLEASE NOTE THERE ARE VARIATIONS IN THE STALK DEPENDING ON AGE, IDEALLY YOU SHOULD BUY ONE WITH THE SAME NUMBER OF HEADLIGHT SYMBOLS ON IT OR THE MAIN BEAM MAY NOT WORK CORRECTLY. IF YOU FIT A 2 SYMBOL CRUISE STALK TO A CAR THAT PREVIOUSLY HAD 3 LIKE I DID AND YOU DON'T HAVE AUTO MAIN BEAM, YOU CAN DISABLE MOMENTARY MAIN BEAM IN THE CENTRAL CONVENIENCE MODULE (09) TO HAVE MAIN BEAM WORKING CORRECTLY. THIS IS ALL BECAUSE THE OPTIONAL AUTO MAIN BEAM FUNCTION REQUIRES A STALK THAT RETURNS BACK TO THE ORIGINAL POSITION AFTER MAIN BEAM HAS BEEN ACTIVATED AND ALL CARS GET THIS (WITH OR WITHOUT AUTO MAIN BEAM). FIT THIS 3 SYMBOL STALK TO AN OLDER CAR AND MAIN BEAM WON'T STAY ON AND IF YOUR CCM IS TOO OLD, CODING WON'T HELP EITHER.

This video consists of the following sections;
0:00 Teaser
0:08 Intro graphics by @haslerdesigns
0:11 What this video is about
1:29 Please subscribe
1:46 The tools needed
3:55 The parts needed
5:16 The fitting process
9:25 Recoding for cruise control
11:48 Cruise control test drive & demo