How to Replace Tie Rod Assembly 98-04 Nissan Frontier

Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/184/s/tie-rods-and-a...

In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the Nissan Frontier and Xterra, model years 98, 99, 00, 01, 02, 03, and 04.

🔧 List of tools used:
• 22mm Wrench
• 21mm Socket http://1aau.to/ofa/1AXAA00043
• 22mm Socket http://1aau.to/oai/1AXAA00266
• Needle nose pliers http://1aau.to/oc6/1AXAA00051
• Needle nose pliers http://1aau.to/oc6/1AXAA00052
• A Piece of Pipe (for leverage)
• Ratchet http://1aau.to/oxp/1AXAA00016
• Torque Wrench http://1aau.to/ogP/1AXAA00044
• Center Punch http://1aau.to/oah/1AXAA00055
• Floor Jack http://1aau.to/ofJ/1AXAA00068
• Hammer http://1aau.to/oc3/1AXAA00091
• Jack Stands http://1aau.to/ofQ/1AXAA00065

For More Info visit us at http://1aau.to/h/WK/

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.