Скачать или смотреть RiiRoo Police Pursuit 12v Kids Electric Ride On Car Assembly Instructions

If you're looking for instructions to build your RiiRoo Police Pursuit Ride on Car, then check this out! - 12v Our RiiRoo 12V Police Pursuit Ride on Car with working front and back lights and music media centre is the latest addition to the RiiRoo range.

RESOURCES & LINKS:
____________________________________________
For more info on this car, visit http://bit.ly/PoliceRideOnCar Our ride on cars - https://riiroo.com/collections/ride-o... Our ride on motorbikes - https://riiroo.com/collections/electr... Our ride on scooters - https://riiroo.com/collections/riiroo...
____________________________________________

1. Your new RiiRoo Police Pursuit should come with a small instruction booklet.
2. Ensure all of the parts are present before you start to assemble.
3. Place the body of the car on the floor or alternative flat surface.
4. Remove the elastic band securing the motors.
5. Rear wheels - Ensure this order - wheel, washer, and finally split pin.
6. Attach the wheel and trim to the relative gaps on the wheel.
7. Front wheels - Ensure this order - wheel, washer, and finally split pin.
8. Attach the front wheel trim to the relative gaps on the wheel.
9. Repeat the process on the other side
10. Connect the battery terminal multi-plug
11. Once battery terminals are connected, check to see if the car powers up.
12. Remove nut & bolt from the steering wheel.
13. Connect the steering wheel wire to the multiplug protruding from the steering console.
14. Ensure the wire is threaded to the console once connected to prevent damage.
15. Ensure the steering wheel is lined up with the hole on the steering rod.
16. Secure the steering wheel with the nut & bolt that was previously removed.
17. Attach the front windscreen to the relative gaps on the bonnet.
18. Ensure the wire attached to the windscreen is threaded through the body of the car.
19. Connect the wire attached to the front windscreen to the wire underneath the car.
20. Slide seat onto the brackets.
21. Secure it by twisting the pin in the middle of the seat.
22. Attach the front bumper to the relative gaps on the front of the car.
23. Lineup the wing mirror with the relevant gap on the side door.
24. Secure it with screws.
25. Repeat the process on the other side.
26. Plug the radio into the media player and attach it to the hook on the dashboard.

► If you need help choosing a ride on toy for a present, then check us out @ https://riiroo.com/ ►Subscribe: http://bit.ly/RiiRooSubscribe to see more videos on our ride on toys.
►Find us on Facebook:   / riirooltd  

#rideoncarassembly #riiroo #policerideoncar