How to 3D Print at 600mm/s: Max Speed & Flow Rate Tips for Fast, High-Quality Prints

Hello Inventors! 🚀 Today, we're diving deep into 3D printing at 600mm/s. Many of you have asked why your 3D printer doesn’t reach the speeds you set in the slicer, a software that converts 3D models into instructions for the 3D printer, so I’m here to explain the Max Speed and Max Flow Rate on modern 3D printers and slicers like Orca, Bambu Lab and Creality Print.

In this video, we’ll uncover why slicers limit your printer’s speed and how to bypass these limitations while protecting your printer’s lifespan and print quality. Learn how the right volumetric flow rate and filament choice can make a huge difference in your high-speed prints. I’ll also share practical tips for adjusting settings without damaging your printer and run tests with real-world examples like printing a Benchy at 600mm/s! ⚡

🔧 Watch till the end to find out:
Why your 3D printer isn’t reaching full speed
How to safely increase your printer’s speed using proper settings
The importance of filament flow rate for faster, high-quality prints

👉 Don't miss my step-by-step guide on tuning your printer for maximum speed and efficiency:    • Creality K1/K1 Max | Fine tuning for ...  

- - -
🛠️ Useful Links:

🟠 Multi Filament System for Creality K1 and K1C:    • Creality K1 & K1C: Multi-Filament and...  
🟠 Multi Filament System for Creality K1 Max:    • Multi-Filament System for Creality K1...  
🟠 Inventor's Garage Store: https://www.inventorsgarage.store/

_______________________________
Follow me on Instagram:   / diginventor  
LinkedIn:   / wesleymilan  

⚠️Disclaimer: This video is NOT sponsored by any brands. Honesty is super important to me and my channel; all thoughts and opinions shared are my own. Affiliate links help me acquire new products for reviews through purchases made via these links, with no extra cost to the customer.