Installing Proxmox VE 7.x on Debian Bullseye for custom partition layout | Homelab Operations Center

Proxmox should usually be installed via its installer, but if you want a custom root partition layout that the installer can't give you, installing on top of Debian is the answer. In my case, I'm installing Proxmox on my little tiny Dell Wyse 3040 thin client. The Proxmox installer wasn't happy with eMMC storage, and I wanted an ext4 root without LVM anyway (an option the installer won't allow).

Proxmox has a guide on how to do this for PVE 6 and Debian Buster, and not a lot has changed for Bullseye, although I've made a note of all of the differences. So, follow along as I set up this little box to run Proxmox by installing Debian first.

Blog post with commands:
https://www.apalrd.net/posts/2022/pve...

My Discord server:
  / discord  

If you find my content useful and would like to support me, feel free to here: https://ko-fi.com/apalrd

Timestamps:
00:00 - Introduction
01:00 - Debian Install
03:21 - Debian Networking
05:38 - Proxmox APT Repository
07:50 - Proxmox Install
09:10 - Web UI Configuration
11:12 - Conclusion

Proxmox is a trademark of Proxmox Server Solutions GmbH