🔧 DR350S Rebuild - ep.26 How to check and adjust valve clearance?

Hello! :)

This time we will show process of checking and adjusting valve clearance. The most important tool is feeler gauge with range from 0,05mm to 0,13mm (0,002in - 0,005in).
It is also good to have valve adjustment tool, torque wrench (9Nm), couple of o-rings and crush washer.

Keep in mind to check valve clearance from time to time :)
According to the service manual you should check it every 6000km or 3700miles.

If you enjoyed please leave a like and subscribe :)

▶ intro 0:00
▶ demounting valve covers 0:06
▶ unscrewing TDC plug and crankcase plug 0:33
▶ setting engine to TDC 0:57
▶ service manual: valve clearance values 1:32
▶ exhaust valves clearance test 1:36
▶ setting exhaust valve 1 1:56
▶ setting exhaust valve 2 2:51
▶ final test for exhaust valve 1 and 2 3:16
▶ setting intake valve 1 3:43
▶ setting intake valve 2 4:08
▶ final test for intake valve 1 and intake valve 2 4:25
▶ screwing back calve covers and replacing old oring 4:44
▶ service manual: torque for TDC plug and crankcase plug 5:22
▶ screwing back TDC plug 5:25
▶ screwing back crankcase plug and oring change 5:36
▶ our set of puzzles :D 5:50

Have a nice day!

Next episodes about DR coming soon :)

You can also visit our website:
https://dmmotoadventures.com/

Facebook:
  / dmmotoadventures  

Instagram:
  / dmmotoadventures