Siemens LOGO! 8 & Kinco HMI

LOGO!8 FS:04 connected via Modbus TCP to Kinco HMI MT4434TE via Modbus TCP
Declaration of connection settings and addressing under HMIWare & LOGO! Soft Comfort V8.1

Information!
It is not necessary to use or connect a "PLC Modbus Slave" in HWIWare.

Declaration steps:

1) As shown in the video put the hmi driver an check the right TCP adress for the HMI.

2) In Logosoft Comfort 8.1, use "Networkinputs" (NI) as input, and set Outputs "Q" what you like - in my case i used M25, M28 & M29.

3) Important is the "ID" setting.
You must use the right ID what the HMI is set.
In my case it was ID 1 , but you can use what you want.