How to Replace Front Brakes 1994-1997 Honda Accord

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com https://trq.video/ic-1ABFS00058

This video shows you how to install new, quality TRQ brake pads and rotors on your 1994-1997 Honda Accord. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This repair was done on a 1995 Honda Accord LX 2.2L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
1994 Honda Accord
1995 Honda Accord
1996 Honda Accord
1997 Honda Accord

Tools you will need:
• Pry Bar https://trq.video/oabv-1AXAA00020
• 10mm Socket https://trq.video/obM8-1AXAA00017
• 12mm Socket https://trq.video/oceP-1AXAA00015
• 14mm Socket https://trq.video/oceP-1AXAA00015
• 15mm Socket https://trq.video/oceP-1AXAA00015
• 17mm Socket https://trq.video/oceP-1AXAA00015
• 19mm Socket
• 36mm Socket https://trq.video/odc-1AAST00006
• Torque Wrench https://trq.video/obh6-1AXAA00044
• Brake Parts Cleaner
• Cloth Rags https://trq.video/oRK-1AXSS00035
• Copper Anti-Seize
• Gloves https://trq.video/obia-1AXSS00048
• Safety Glasses
• Sandpaper
• Bucket
• Floor Jack https://trq.video/oaCE-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oapm-1AXAA00065
• Punch
• Rubber Mallet
• Wheel Chocks
• Wire Brush https://trq.video/ozc-1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Honda Accord 5th Generation 1994-1997:    • Honda Accord 5th Generation 1994-1997  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.