Singer Heavy Duty Covers Removed and Needle Thread Tension Adjustment

Links included below!
You can Download the Singer Heavy Duty Series Service Manual here: http:\\www.kevinsews.com\download\SingerHeavyDutyServiceManul.pdf
I took the Singer Heavy Duty covers off and removed the bobbin assembly in order to clean and oil this 5 year old machine. It was making a clicking kind of noise so I knew this was needed in order to fix it. What I found was a lot of thread/fabric dust down where the bobbin shaft connect to the bobbin. I also took the time to show how to adjust the thread tension while it was easy to demonstrate. I hope this is helpful to the folks that asked how to address this issue. My next video will cover how I clean and oil the machine; set the bobbin timing (this will address many questions on this subject) and assemble it back together.

Amazon Affiliate Links Below for Products to consider:

Straight Screw Driver: https://amzn.to/3dqTPPc
SITAKE 3pcs Offset Screwdriver Set https://amzn.to/2NjR33C
Mini ultra short screwdriver: https://amzn.to/2YjQaOO
Tri-Flow TF23004 Clear Synthetic Grease : https://amzn.to/3eiMClz
Sewing Machine Oil: https://amzn.to/2BqLAW4
Feeler Gauge Set: https://amzn.to/3elEdhm
Torx Set that includes what you'll need: https://amzn.to/2VAFXvA
WD-40 Specialist Industrial-Strength Cleaner & Degreaser: https://amzn.to/2YUPZZn