Скачать или смотреть How to program the A&D Weighing FX-120i scale to work with the autotrickler.com

This video will show you how to configure the FX-120i to work with autotrickler.com Autotrickler and Autothrower set up. You can purchase the scale or the complete set up from us direct at

https://ce-products.myshopify.com/pro...

We can also pre-program the scale for you at no additional cost.

Step 1- Hold down Sample until BASFnc shows up Press Print
press sample until SPD shows up now press Re Zero twice until 2 is shown
Press Print to lock this in
Step 2- Press Sample until you get to dout Press Print
Prt will now be visible press Re Zero until the number 5 shows up
Press Print to lock it in
Step 3 - Sif will appear after you complete step 2
Press Print
bPs will be on the screen press Rezero until the number 5 shows up
Press Print to lock it in
Step 4 - Push sample until you see UNIT
Press Print
now press sample until you see GN and push Re zero
press sample until you get to G and press Re zero again
Now Press Print to lock it in
Step 5- press sample until you get back to sif
Press print BPS will show up
Press sample to get to btPr
Press re zero until the number 2
Press Print to lock it in
Step 6 - hold down the Cal Button (this will exit out of the menu)
Step 7- Hold down the mode key until the speed flashes
press mode until FAST is displayed
Press the print key to lock it in

Thats it! Your FX-120i, FX-200i, FX-300i or FX-500i is ready to use with the Autotrickler.com set up

Thank you for watching