Скачать или смотреть Art process 25 - Building a silicone mold (part 1) for a MOTU pelvis

Chapter List 👇🏽 | I had the part ready to go, with venting fins and injection channel already glued in place. Spent most of the session building the clay positive backing for the mold.

Toward the end, the plan was to mix up enough silicone to finish the companion mold to this part, along with pouring part 1 of this mold. Unfortunately, my math was off (been happening more lately) and I came up short for the companion mold. So, I was able to pour part 1 of this mold, but was unable to finish the other. Ended the session a bit early due to this unplanned mishap.

0:00:00 Stream startup chatter
0:00:21 Building clay positive basic shape for pelvis mold part 1
0:06:14 Defining the parting / seam line
0:40:58 Refining the clay surface shape
1:18:16 Begin building the mold box sides
1:36:58 Sealing the mold/wall seam joints
2:15:17 Putting up the third wall, sealing joints
2:26:25 Adding keys to the last wall and inner sides
2:34:22 Estimating silicone needed for another mold half
2:52:54 Measure + mix the silicone
2:58:39 Adding the color dye to part B
3:11:06 Mixing A+B and pouring into the mold
3:17:35 Cleanup the mess!
3:25:38 Recap, review, wrapping up. Thanks for watching!
-- Tips are always appreciated! https://streamelements.com/neostalgia...
-- Watch live at   / neostalgia_toys