Harley FXR Build Part 1 | Twin Cam Swap | Engine mounting | Pivot Block install | Neck bearings

Check out the other videos of this build!
Part 2:    • Harley FXR Twin Cam Build Part 2 | Re...  
Part 3:    • Harley FXR Twin Cam Build Part 3 | Ch...  

The bike is a 1987 FXRC. It had 43k miles when I bought it from the original owner.

I started this project a while ago but just began filming in 2021. So this series will mostly entail reassembly of this bike. The bike will be getting a 2001 twin cam and 2001 touring transmission as well as 39mm front end along with a host of other upgrades.

0:00 intro
1:00 Transmission block off plate for Twin cam swap
5:48 placing transmission in frame
7:00 placing engine in frame
7:52 front engine mount install
10:46 top engine mount install
11:56 Alloy art pivot block install
14:42 aligning front mount by eye
16:50 Neck bearing install
19:51 outro

Prior to deciding to film this, I took the bike down to the frame. I also build the twin cam from the cases up.