An easy way to fit the disc side seal on a KOM Xeno rear hub.

This shows an easy way to fit the rear disc side seal on KOM Xeno hub. This is an important seal to position correctly as it prevents dirt and water getting into the ratchet area of the hub. Also if fitted incorrectly it can get caught in the ratchet mechanism. This both reduces sealing and adversely affects ratchet performance.

The seal sits between the ratchet end cap and the ratchet and is located when the rear disc and cap are positioned with 4 Torx T25 special screws.
It's an obvious trick once you see it but can save you a lot of time.
Using this trick also makes you feel much more confident that the seal is correctly fitted. (As you can't easily visually check it is in position.)