How To Replace Front Wheel Hub 2008-13 Cadillac CTS

Описание к видео How To Replace Front Wheel Hub 2008-13 Cadillac CTS

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com http://1aau.to/ia/1ASHF00404
New Wheel Bearing & Hub Assembly Set from 1AAuto.com http://1aau.to/ib/1ASHS00681

Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to do the replacement yourself on your 2008-2013 Cadillac CTS Second Gen.

• Check here for more videos on the 2008-13 Cadillac CTS:    • Cadillac CTS 2008-2013 Second Gen  

This repair was done on a 2008 Cadillac CTS and the process should be similar on the following vehicles:
2008 Cadillac CTS
2009 Cadillac CTS
2010 Cadillac CTS
2011 Cadillac CTS
2012 Cadillac CTS
2013 Cadillac CTS

Tools you will need:
• 10mm Socket http://1aau.to/oBY/1AXAA00017
• 18mm Socket
• 22mm Socket http://1aau.to/ocu/1AXAA00266
• Brake Caliper Hanger http://1aau.to/obJ/1AXAA00439
• Needle nose pliers http://1aau.to/ofF/1AXAA00051
• Needle nose pliers http://1aau.to/ofF/1AXAA00052
• 1/2 Inch Impact Gun http://1aau.to/oc6/1AXAA00252
• T30 Socket
• Ratchet http://1aau.to/oJR/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/oGF/1AXAA00015
• Torque Wrench http://1aau.to/ouQ/1AXAA00044
• Center Punch http://1aau.to/oce/1AXAA00055
• Floor Jack http://1aau.to/okX/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/ojR/1AXAA00065
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Cadillac CTS 2008-2013 Second Gen:    • Cadillac CTS 2008-2013 Second Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии

Информация по комментариям в разработке