Скачать или смотреть #control

For more details you can see this article :
https://www.robotique.site/tutorial/c...

To control an RGB LED module with a Micro:bit, you will need a few components and some additional materials. Here's a list of the components you'll need:
Micro:bit Board:
The Micro:bit is the central controller for your project. It has input/output pins that you'll use to control the RGB LED module.
RGB LED Module:
You will need an RGB LED module. These modules typically have four pins: one for the common anode (positive), and three for the red, green, and blue color channels.
The GPIO expansion card for the Micro:bit card
The GPIO expansion board for the Micro:bit board expands the capabilities of the Micro:bit board by adding more input/output (GPIO) pins and additional functionality.
Connecting Wires:
You'll need jumper wires or connecting cables to make the necessary electrical connections between the Micro:bit and the RGB LED module.
Breadboard (Optional):
A breadboard can be useful for creating temporary connections without soldering. It simplifies the wiring process.

To mount a Micro:bit board with an RGB LED module, you will need to physically connect the Micro:bit to the RGB LED module using wires. Here are the steps to mount the Micro:bit with an RGB LED module:
1- Prepare Your Components:
Ensure you have a Micro:bit board and an RGB LED module.
Prepare the connecting wires. You will need wires to connect the Micro:bit to the RGB LED module.
2- Identify the Pins:
On the Micro:bit, identify the pins you will use for connecting to the RGB LED module. Common choices include pins P0, P1, and P2 for controlling the RGB LED's red, green, and blue channels.
On the RGB LED module, identify the pins for the common anode and the individual cathodes for red, green, and blue.
3- Make the Connections:
Connect the pin R(red) of RGB LED module to pin P0 of Micro:bit
Connect the pin G(Green) of RGB LED module to pin P1 of Micro:bit
Connect the pin B(Blue) of RGB LED module to pin P2 of Micro:bit
Connect the pin GND of RGB LED module to pin GND of Micro:bit

To create a color variation of an RGB LED module using the Micro:bit card and MakeCode, you can write a simple program that changes the colors in a loop. Here's how you can do it:
1- Open MakeCode: Visit the MakeCode website (https://makecode.microbit.org/).
2- Create a New Project: Start a new MakeCode project for your Micro:bit.
3- Write the Color Variation Code
This code will cycle through the colors red, green, blue, orange, and purple, with a one-second pause between color changes. You can adjust the basic.pause value to control the speed of the color variation.
4- Download and Transfer the Code: Click the "Download" button to transfer the code to your Micro:bit.
5- Run the Program: The Micro:bit will now display a color variation as programmed.

This code will continuously cycle through the defined colors on your RGB LED module. You can customize the list of colors or add more colors to create different visual effects. Adjust the timing and colors to suit your preferences.