Autocad Civil 3D - Pipe Culvert - Boru (Büz) Menfez

Create pipe culvert with assembly and its calculation.
Tip kesit ile boru (büz) menfez çizimi ve hesaplarının yapılması.

Contact for assembly: [email protected]

*Skewed culvert is not drawn with pipe culvert assembly.
*Boru (büz) menfez tip kesiti ile verevli menfezler çizilememektedir.


OPERATIONAL STEPS
Objective: To draw a pipe culvert project for a road project and perform the calculations.
*It should be noted that detailed projects for the culvert are required for precise calculations.

The horizontal alignment, vertical profile, assembly and corridor for the main road have already been drawn in the project.
Similarly, the approximate horizontal alignment and vertical profile (flow elevation) for the pipe culvert have been previously drawn.

1. Create assembly for the culvert (3 pipes). Then, create the culvert headwall corridor.
2. Create a cross-section at the culvert alignment on the main road.
Using this cross-section, mark the culvert body, wings, and headwall sections, and display these sections along the culvert alignment.
3. Revise the horizontal alignment and vertical profile based on the culvert length.
4. Divide the culvert corridor into 5 parts and define assembly to create the culvert body, wings, and headwall sections.
5. Create cross-sections for the culvert. Then, calculate the excavation for the slopeless culvert.
6. Convert the culvert excavation into a sloped excavation.
7. Create a 3D Solid model from the culvert corridor, and use the "Massprop" command to calculate the concrete volume.