Hobby King Red Arrow Hawk 35mm EDF Micro Jet EPO (PNF) - Set Up Overview

This is what Thomas wanted for this 13th Birthday. Had a number of people ask if there was much involved with getting it set up and flying. In all honesty most of the work is already done for you. In fact the only gluing we did was the Vertical Stabiliser which we use 5min Epoxy. The only other thing needed to be done was find a place for the Receiver, which fit nicely into the upper portion of the Fuselage.

Needed to cut away a little bit of foam to allow us to push the battery back so as to achieve the correct CG. Also needed to remove some foam from the Canopy to allow it to sit correctly on the Fuselage.

It came with a Build manual which we only used to achieve the correct CG.

In any case Hope you enjoyed it.

Red Arrow
http://www.hobbyking.com/hobbyking/st...

Battery - Turnigy nano-tech
http://www.hobbyking.com/hobbyking/st...

FrSky Receiver
http://www.hobbyking.com/hobbyking/st...