First Ecoboost to make 600WHP! 2011 Ford Flex Ecoboost ATP Turbo upgrade

Please read for vehicle information!
http://ecoboostperformanceforum.com
http://ecopowerparts.com for all your Ecoboosted vehicle parts!
Took the Flex to the dyno after installing the new ATP turbo upgrades available at http://eb-pp.com
The motor is STOCK internals.
The car has the following mods:
Dual in tank fuel pumps
6 auxiliary injectors
Split-Sec aux injector controller
Car runs on straight E85 - 23 degrees of timing.
PPE Engineering 2.5" catted downpipes with stock cat-back.
Custom turbo to intercooler and intercooler to throttle body piping with silicone tubes to replace factory plastic/rubber parts. Replaced factory electric BoV with Tial BoV.

First pull 505HP/515TQ 15PSI - using stock ECU for boost control
Second pull 563HP/598TQ 23PSI - removed connection to factory boost controller, turbos running on wastegate spring
Third pull 587HP/642TQ 25PSI - same as second pull - allowed the boost activated cutout to open
Fourth pull 592HP/630TQ 25PSI - same as third pull - disconnected piping to filter in the fender
Unseen pull 600HP/642TQ - Cutout open, car had sat as we were uploading files to ECU - car was running cold air intake

Thanks to:
Black Market Racing (install/dyno)
SCT Tuning and Unleashed tuning (for the tune on the car and hardware to do it)
ATP Turbos (+2 Upgraded turbos)
PPE Engineering (2.5" catted downpipes)
Airaid (UBI intake)
Split Second (Aux injector controller)
Megan Racing (making the car look cool)