Dirt and grime not only look bad on your bike, but they’re also bad for your motorcycle’s finishes. We’ll show you the proper way to deep-clean your bike in this video from the MC Garage.
--
When you wash your bike, you're not just making it look good, you're removing dirt, grime, dead bugs, and corrosive crud that's bad for your bike's paint, chrome, and metal parts.
Step 1: Gather Your Motorcycle Washing Materials
To get your bike looking its best you'll need a washing mitt, two buckets, a general-purpose car wash cleaner, an old paintbrush or sponge brush for getting in nooks and crannies, and a chamois or a stack of old towels to dry the bike off when you're done—just make sure they're clean. If you're using a spray-on car wash, you need that, a brush, and a way to rinse off your bike.
Step 2: Prep Your Motorcycle
Whether you're washing the old-fashioned way with soapy water and a mitt or using a modern spray-on/rinse-off cleaner, your motorcycle needs to be cool so the water, soap, or cleaner doesn't just evaporate when you spray it on. Move your motorcycle out of the sun and into the shade, that's where you should be working. Washing in the shade is preferred because the sun won't dry things out and create water spots and streaking.
Step 3: Rinse Off Your Bike
When your bike has cooled, go ahead and spray it down with either a hose or with your bike-specific product. Wait a couple of minutes for the bike to soak and for those exoskeletons and grime to loosen.
If you're using something like WD-40 Bike Wash, then you just need to rinse the bike off with water and the cleaning process is supposedly done, but if you've got stubborn grime or if you're using soapy water, then it's time to bust out the wash mitt and your brushes.
Step 4: Washing With The Two Bucket Method
As for those two buckets, one is for your soapy water, and the other is just for rinsing out your mitt or sponge so it stays clean. Here's the concern—your bike is dirty, and if you just scrub it down with a dirt-encrusted mitt, you could scratch and haze your paint.
So clean small sections of the bike at a time, starting at the top and working your way down. Rinse your sponge regularly and rinse off the bike as you go. You can use an old brush to get in around spokes and engine fins and clean other nooks and crannies, and once the bike is good and clean, give it one final, thorough rinse with a hose.
And whenever you put your sponge or cleaning tools down, put them in the rinse bucket. Setting them on the ground is a great way to pick up sand or grit that might scratch your paint.
Step 5: Dry Your Bike And Run The Engine
With your bike all washed and rinsed, it's time to dry it off. You've got a couple of options here, from using compressed air or a leaf blower to just toweling or chamois-ing the bike down. Again, make sure whatever you're wiping your bike with is clean and grit-free. Once you've gotten it blown off or wiped down, it's a good idea to start the bike and let it run to help evaporate any residual moisture that didn't flow out of the drain hole in the muffler.
Step 6: Lube Your Chain
You have a clean motorcycle, but don’t forget to lube your chain. The water, soap, and cleaner have stripped off any lubricant and this is the perfect time to reapply, and reapply it correctly. If you want to, you could wax your paint too. It’ll add extra shine and protect the finish so it’ll stay pretty longer.
Can I Wash My Motorcycle With A Pressure Washer?
At this point, you’re probably wondering if it isn’t just easier to blast your bike with a pressure washer. It’s tempting for sure, but you need to be careful not to direct the stream of water at your wheel bearings, swingarm pivot, fork seals, chain, and electrical connectors since you could compromise the seals. For a thorough clean, you’re better off doing it by hand.
How To Wash A Motorcycle The Right Way
Get your motorcycle washing materials ready
Let your bike cool or wheel it over to the shade
Rinse your bike down
Wash with soapy water using the two bucket method
Rinse off the suds and dry your bike
Lube your chain
Go for a ride!
Full story here: https://www.motorcyclistonline.com/pr...
Support the companies that support MC Garage.
Motion Pro specialty tools: www.motionpro.com
Bel-Ray lubricants: www.belray.com
HMC Industries motorcycle lifts: http://www.hmcindustries.com
What do I need to wash a motorcycle? (0:29)
Rinsing off your motorcycle (1:08)
Washing a motorcycle using the two bucket method (1:30)
Should I use a pressure washer to clean my motorcycle? (2:17)
Drying your motorcycle (2:45)
Clean and lubricate your chain (3:05)
Subscribe: http://www.youtube.com/c/Motorcyclist...
Motorcyclist Shirts: https://teespring.com/stores/motorcyc...
Shop Products We Use: https://www.amazon.com/shop/motorcycl...
See more from us: http://www.motorcyclistonline.com/
Информация по комментариям в разработке