PETG Showdown: Prusament vs. Polymaker vs. eSUN!

Dive into my latest video where I put PETG filaments from Prusament, Polymaker, and eSUN head-to-head! From unboxing to printing, I cover it all, so you can make an informed decision on your next filament purchase. Which brand will come out on top? Watch now to find out! #PETG #FilamentShowdown #3dprintingbusiness

Additional information;
• I am located in the United States in Ohio
• SUNLU Dryers I use
• S2 with/Fan https://a.co/d/3s7ft0N
• S2 without/Fan https://a.co/d/4aACl1U
• PETG setting for SUNLU
• SV 65°C
• Time 06:00:00
• Links to Filaments used
• Prusament: https://www.prusa3d.com/en/product/pr...
• Cost per roll: $29.99 on Prusa site at time of test USD
• Shipping is charged by roll to get lower shipping prices by quantity 10-20
• At time of test ordering quantity 20 gives shipping price of $6.71 per roll to Cleveland, Ohio, USA
• Polymaker: https://a.co/d/cEGUniJ
• Cost per roll: $21.99 on Amazon at time of test USD
• Shipping free as Prime Member
• eSUN https://a.co/d/1dQeFCo
• Cost per roll: $21.99 on Amazon at time of test USD
• Shipping free as Prime Member
• PrusaSlicer settings
• Filament Profile: Prusament PETG
• Modified Values (due to the rooms ambient temperature being 66°F)
• Bed First Layer 90°C (85 original)
• Bed First Layer 95°C (90 original)

Chapters:
0:00 Introduction
1:30 Describing the method and controls for heads up test
2:54 Unboxing the filaments
12:16 Evaluating discussing how they dried
15:16 Reviewing the prints
19:53 Test results
20:15 Next steps after initial tests and final thoughts
23:05 Film of part B printing using Polymaker