Скачать или смотреть Silicone sponge rubber cords o rings full automatic cutting and splicing machine ES -060

Silicone sponge rubber cords o rings full automatic cutting and splicing machine ES -060
1,Auto feeding maximum 15 pcs of silicone sponge rubber cords.
2, Cutting length can be set on the machine freely up to 2000mm
the middle supporter will go up to support weight of gaskets
to avoid it from weighing down and avoid cuting length tolerance
3, Dipping both ends of silicone sponge rubber cords with
silicone adhesive.
4, heating curing silicone adhesive with high temperature
of 170 degrees for 10 seconds.
5, One cycle time is around 35 seconds for 1000mm cutting
length.
6, after bonding into o rings ,the collection hand
will collect bonded o rings and drop to collection zone
(collection convey belt)
7, Good joint quality for every pc bonded o rings.
8 , Bonding strength test
Pulling against a 4kg fire distinguisher
to reach large elongation,every pc bonded o rings is good bonding strength
9, Cutting length tolerance test
Cutting bonded o rings to length again and measure
length one by one
the minimum cutting length is 998mm
and maximum cutting length is 1000mm
cutting length tolerance is 2mm

In general
The silicone sponge rubber cords o rings made by the silicone sponge rubber cords o rings full automatic cutting and splicing machine are Good joint quality ,good joint strength and small cutting
length tolerance ,good quality made o rings

Contact michael at [email protected] or visit our webpage :
https://www.chesmai.com/automatic-sil...