Скачать или смотреть Metallic FashionFlex Puff HTV For a 3D and Brushed Metal Look!

Metallic FashionFlex Puff HTV
https://creativedesignsupply.com/fash...
APPLICATION INSTRUCTIONS
IT'S BEST TO TEST!
If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.
CUTTING
Metallic: 60° Blade recommended

MIRRORING
Cut this material into a mirror image.

TEMPERATURE
All colors:
255°F – *275°F
Vary Puff effect by increasing or decreasing temperature by 10°F within range.
*Metallic: 275°F

PRESSING
Medium Pressure

TIMING
12-14 seconds
Start at 12.
If more time is needed, press an additional 2 seconds.
Metallic: 10 seconds.

PEELING
Peel hot.
Remove the carrier and/or transfer sheet immediately.

WASHING
Wash inside-out, cold water, gentle cycle. Tumble dry low.

LAYERABLE?
No
NOT SURE WHICH HTV IS RIGHT FOR YOU? CHECK OUT OUR COMPARISON CHART!
TECH INFO
Tech PDF includes product thickness, roll sizing, and other technical information

CUT SETTINGS
PLEASE NOTE: Every blade and machine is a little bit different- always remember to test cut! These cut settings are a starting point to be adjusted to your blade and machine.

Clear plastic side needs to be face down while cutting. Peel up a corner of the carrier to determine this before cutting. Carrier can be shiny or matte depending on batch.

FashionFlex Puff is a puff product line available in 28 colors, plus 4 Metallic Puff colors – the most puff colors in the industry! This is super easy to use as you only need to press once to get that puff effect. It’s easy to weed and its pressure-sensitive carrier allows for easy repositioning. #htv #puffhtv #creativedesignsupply