Скачать или смотреть etrailer | Complete Breakdown of the Accessory Bracket for Front Runner Slimline II Platform Rack

Click for more info and reviews of this Front Runner Roof Rack:
https://www.etrailer.com/Accessories-...
Check out some similar Roof Rack options:
https://www.etrailer.com/dept-pg-Acce...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Fron...
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look, at this Front Runner accessory bracket set. These brackets, we're gonna have two of them. They are going to allow easily mount onto your Slimline II platform rack, and allow you to very simply install spotlights, antennas, or other accessories that mount with a single, one half inch diameter bolt. So if you have a spotlight, or something that uses a half inch diameter bolt, we'll mount right through there. And then this will give you that mounting location on your Slimline II platform racks, that you can use those spotlights or other accessories.

Now these will install on the front, the side, or your rear profile channel, with the included hardware that's included here. And these brackets do tilt. So you've got quite a range of adjustability here. So, you can see we can sit, get it mounted in the zero degree position, and just take out that bolt, get those holes lined up, pass it through like that, so we can have it mounted straight up. We can have it mounted out at a 45 degree angle.

We pass it through there, and we'll hold it there. And then we can also mount it in the 90 degree angle like so. And then we can also flip it over. So if we're needing an angle pointing down, we can have it going in any of those same orientations, in the reverse orientation. This does have a stainless steel construction, with a black powder coat finish, so it is going to resist corrosion, hold up well, Do a great job for you for a long time to come.

Give you a nice solid connection there. The dual mounting points, are gonna help reduce your vibration, and help prevent any damage to the accessories that you have mounted here. Now, out of the box, this is gonna work for your Slimline II platform rack, but it can also work with your Slimsport platform racks. and Slimpro van racks, if you add on the side mount accessory bracket that you see listed on the screen there. So if you do have either the Slimsport platform rack, or the Slimpro van rack, you will need that.

That is sold separately, but that will allow you to use this bracket set. You can also use this with the original Wind Cheetah Slimline platform rack, but you will have to do a little bit of drilling into the rack, in order to get these mounted in place. So if you are needing to mount a spotlight, antenna, or other accessory, with that half inch diameter mounting bolt, this is gonna be a great way to go. And that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.