How to Replace Upper Ball Joints 2005-2015 Toyota Tacoma

Buy Now!
New Ball Joint from 1AAuto.com http://1aau.to/ia/1ASBJ00319

This video shows you how to install new upper ball joints from TRQ on your 2005-2015 Toyota Tacoma. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.

This repair was done on a 2010 Toyota Tacoma Base 2.7L Standard Cab Pickup 2-Door 4WD Manual and the process should be similar on the following vehicles:
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obHL/1AXAA00013
• Pry Bar http://1aau.to/o9L/1AXAA00020
• 22mm Wrench
• 10mm Socket http://1aau.to/obIV/1AXAA00017
• 21mm Socket
• Cutoff Wheel http://1aau.to/oaC/1AXAA00254
• Pliers
• Snap Ring Pliers
• 1/2 Inch Impact Gun http://1aau.to/oyG/1AXAA00252
• 3/8 Inch Impact Gun
• Ratchet http://1aau.to/ocbq/1AXAA00016
• Torque Wrench http://1aau.to/obdr/1AXAA00044
• Bungee Cord
• Cotter Pin
• Gloves http://1aau.to/oa9P/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oay2/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/oakP/1AXAA00065
• Large C-Clamp
• Large Hammer
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.