Review of Draw-Tite Front Receiver Hitch - Custom Fit Front Mount 2 Inch Receiver - DT44HR

Click for more info and reviews of this Draw-Tite Front Receiver Hitch:
https://www.etrailer.com/Front-Receiv...
Check out some similar Front Receiver Hitch options:
https://www.etrailer.com/fitguidefmr.htm

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Draw...
Hi, everybody. Andy here with etrailer.com. Let's take a look at this Draw-Tite custom fit front-mounted 2 inch trailer hitch receiver. Now, this hitch receiver has been designed to fit your 2019 to 2022 Chevrolet Silverado and GMC Sierra 1500s and then your 2022 Chevrolet Silverado and GMC Sierra 1500 LTD and Limited. On custom fit parts such as this front-mounted trailer hitch receiver, I do recommend taking advantage of our vehicle fit guide here at etrailer.com. Simply input the year, make, and model of your truck and our fit guide will confirm if this will work for you or if we have something comparable that will work for you.

Now, this 2 inch front-mounted hitch receiver is going to give you an attachment point for your hitch-mounted accessories such as a winch, spare tire carrier, snowplow, cargo carrier, and whole lot more. With this hitch, you won't have to worry about blindly backing your trailer in. You'll just hook it up to this front-mounted hitch and you can just drive that trailer forward. Now ,this does have a line pull of 9,000 pounds and a vertical load or tongue weight of 500 pounds, and this trailer hitch receiver does feature a sturdy square tube design and computer-aided fully welded steel construction, which will ensure strength and durability. This has been Tested Tough.

And in case you don't know, Draw-Tite's Tested Tough program provides testing standards that are far superior than those outlined by the Society of Automotive Engineers, also known as SAE, the go-to source for engineering professionals. So this is going to be an easy bolt-on installation. What's nice about this is no drilling is required for installation. I do want to let you know that trimming of your front air dam and or fascia may be required for installation, just so you're aware of that. And as you saw here, a complete hardware kit is included along with a set of instructions to guide you through that installation process.

And this does feature a black powder coat finish that covers an e-coat base, giving you superior rust protection. Now, some of our neighbors here at etrailer.com are interested to know the measurement from the back of the cross tube to the front of the trailer hitch receiver. So let me see if I can angle this in such a way to where you can see that measurement in case you we inchesre wondering as well. So measuring from the front to the back, we're sitting right at a foot, 12 inches. Of course, that pinhole diameter is 5/8 of an inch and you will receive a lifetime technical support from us here at etrailer.com.

Well, I think that's going to wrap up our look today. I do hope that it's been helpful for you. Again, my name is Andy, thank you for joining me.