OXVA Arbiter Solo RTA | Innovative MTL & RDL airflow system that works | Solid & flavorous

When both MTL & RDL airflow options are the selling point of a RTA, I tend to be sceptical that both airflow options preform perfectly in both airflow configurations. Well after experimenting with the Oxva Solo, I was pleasantly surprised to find out that indeed both airflow options work perfectly and can be swapped by a simple turn of the top cap. Innovation!! As a bonus the flavour is superb on both airflow options and the build quality is solid.

Unique airflow features,
The main function of the Arbiter Solo RTA is the airflow system: First of all, it is worth noting that there is a switch on the top cover, with the help of the rotating switch to set the fastening type. Just turn the top ring to switch between MTL and RDL. Turn left to close the side airflow and you would get a perfect MTL; Turn right and you would get an RDL RTA. And the air hole is high, so the tank is a mature Anti-leakage structure. After setting the airflow, there will be two options to make the airflow into the coil - Only bottom airflow is most suitable for MTL, and 3D airflow is most suitable for RDL. For the bottom airflow, three holes with a diameter of 1 mm are used below the coil, and for the side airflow, two other holes with a diameter of 3 mm are added to the deck. Depending on the type of tightening selected, air intake through a hole with a diameter of 0.8/1.0/1.2/1.5/1.8 mm in the upper part of the RTA and a wide hole.

Specifications,
Size: 25* 56.5mm
Innovative RTA for MTL and RDL
Dual airflow system for MTL & RDL
Top-to-bottom airflow for MTL, top-to-3D for RDL, switch by turning the top cap ring
Tiny inner chamber for enhanced flavour
Convenient top fill
2 different 510 drip tips for MTL and RDL
2-post winding deck, easy to build
Almost completely leak-proof due to the top AFC
25mm diameter, compatible with most atomizers
Material: SS & Glass
MTL holes: φ0.8/ φ1.0/ φ1.2/ φ1.5/ φ1.8mm
Drip tip: MTL & DTL 510 drip tips
Thread: 510