Suzuki Jimny EVC throttle controller installation | IMPROVE ACCELERATION or SAVE FUEL!

We Install a EVC I-drive throttle controller on our Suzuki Jimny. The process is similar for most throttle controllers and vehicles. If you really want to save fuel I suggest economy modes as the dampening of the accelerator will force your driving style to conserve fuel.

A.C. Mode is my personal favorite as its a balance of speed and fuel economy. Test all modes to find your preference.

I have tested it for a Month and reduced my fuel consumption by 10% on A.C. Mode. The drive is much smoother and hunting for gears has also stopped when you need power to overtake.

Chapters
0:00 Introduction
0:46 How Does it Work?
2:28 Installation

Installation:

Step 1:
Turn off the ignition Key
Step 2:
Wait 10 minutes before removing accelerator plug.
“This is necessary to avoid the check engine light going on.”
Step 3:
If the module is unplugged from the display unit connect it together.
Step 4:
Locate the accelerator plug situated on top of the pedal assembly. Carefully press the release clip on the plug with your thumb and pull it up to release it from the pedal assembly.
Step 5:
Plug the male end of the of the adapter into the pedal assembly.
Step 6:
Plug the original cable from the pedal assembly into the female end of the adapter.
At this point I prefer to test my accessories before actually fitting and final installation. Great its working!
Step 7:
Positioning your Display controller based on your driving position. Affix the controller to final position of the interior.
Step 8:
Run cables neatly in the dash and connect up to module.
Step 9:
Use cable ties to attach module out of the way of accelerator assembly.
Step 10:
Tie excess cable length under dash with cable ties. I used a longer cable tie to help with the position I chose.
Step 11:
Ensure that the controller is set to match your Automatic or Manual transmission
Press and hold the mode key for 3 seconds this will display 00 for manual transmission or 88 for automatic.

That’s it we are ready for a test drive!