Скачать или смотреть Explosion Proof LED Light For Class 1 & 2 Divisions 1 & 2 - Adjustable LED Light - Circular Base

http://www.larsonelectronics.com/p-71...

Made in the USA

The EPL-22BS-1X150LED-100 Explosion Proof LED Light With Round Base from Larson Electronics is rated Class 1 Division 1-2 Groups C & D and Class 2 Division 1-2 for use in hazardous work areas where flammable gas and dust may be present. The portable LED light unit provides 12,000 lumens of light output and is designed for easy entry into 22" OD manways without disassembly. This explosion proof light is suitable for hazardous areas that lack standard illumination, such as in tank cleaning, offshore drilling, power plants, refineries, paint spray booths, and other similar platforms.

The EPL-22BS-1X150LED-100 explosion proof LED light provides 9,500 square feet of work area coverage with 12,000 lumens of light output while only drawing 150 watts. This unit is portable and can be easily passed through manways 22" in diameter or larger. The LED light head on this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and hazardous locations where flammable vapors, gases and dusts may be present.

The removable LED light measures 16 inches by 14 inches and is mounted on a 21.5" diameter circular non sparking aluminum powder coated base with a total height of 41" inches. The LED lamp can be easily tilted up/down 90 degrees by simply loosening the two T handles located on either side of the light head and re-tightening them. The light head can be swiveled 360 degrees as well as completely removed by loosening the T handle at the base of the fixture and then re-tightening it. Included with this LED light fixture is 100' of SOOW cord terminating in an 1523 explosion proof straight blade plug.

The explosion proof LED light head in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.

This unit is multi-voltage capable and can be configured to operate on 120-277 volts 50/60 Hz. Further adding to the versatility and convenience of this explosion proof LED light are 25 peel off mylar overspray lamp protectors that ship with the unit. The protectors provide lamp protection from dirt or debris and can be removed, cleaned and replaced, lessening the need for tedious lamp cleaning or replacements. This lamp is T5 temperature rated and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent lamps.

This portable explosion proof LED lamp mounted on a circular base provides portable illumination for applications in confined spaces which require lighting, such as tank cleaning, curing, paint spray booths, power plants, and similar hazardous environments.

Learn More: http://goo.gl/Ip22Ms

#larsonlights