🔆XH-W3001 Temperature Controller - Setup - Settings & 🔴 Live Testing 🔴

- What is Xh-W3001 Temperature Controller?
Xh-w3001 temperature controller is a digital microcomputer which is used to control the temperatures in refrigerators, ovens and other similar appliances. It is equipped with a delicate digital display which allows you to set the temperature range from -50 to 110 degrees. The device is easy to install and wire. It has a flashing display which shows the temperature reading. It is also waterproof and can measure the temperature in 0.1 degrees.

- W3001 Temperature Controller Setting
W3001 Temperature Controller Settings allows you to set the start and end temperatures for different temperatures. It also has a temperature range from -50 to 110. Its user-friendly wiring and installation makes it easy to use. This controller can used for industrial equipment such as chillers, steamers and freezers. The controller comes with a clear LED display, which helps you see the temperature better. You can set the temperature range for different applications with this controller, such as domestic freezers, water tanks, refrigerators and more. Here is the temperature controller xh-w3001 wiring diagram.

The W3001 Temperature Controller Settings has two buttons, one for starting the device, and one for stopping it. Once you’ve set the temperature, press and hold one of the two buttons until the screen starts to blink. Then press and hold the right-hand relay temperature. The screen will stabilize and show the temperature that was read by the thermocouple sensor. Once the temperature is set, press and hold either button until it stabilizes.

- w3001 Temperature Controller Manual
The W3001 Temperature controller is a low-cost PID temperature controller for water cooling pumps and gaming computers. This unit comes with a one-meter waterproof stainless steel probe, a self-contained enclosure, and a digital display. To operate the unit, simply press the UP button on the control panel to activate the temperature display. If you want to see your temperature in real time, you can use the built-in flashing display. This is the xh-w3001 manual for operating it. Also here is the xh-w3001 schematic diagram for learning.

- How Do I Program a XH w3001
You can use the XH-W3001 to control your home’s temperature. Simply press the UP or Down button to change the start or stop temperature. Pressing the DOWN button will show the desired temperature. By pressing the UP or Down button, you can program the desired temperature. The XH-W3001 has a range of -50 to 110 degrees Fahrenheit. This is very environment friendly because of it is ABS flame retardant plastic material.

@MG Production @theworldnews @mgproduction
WEBSITE - https://mohitgajera.com
FACEBOOK -   / mohit.gajera007  
TWITTER -   / mohitgajera  
INSTAGRAM -   / mohitgajera1  

COPYRIGHT @MG Production © ®
COPYRIGHT @THE TECH LAB © ®
COPYRIGHT @🌎THE WORLD NEWS 🌎 © ®