DUCATI MONSTER 1200S Clear Clutch Cover Install

A fun mod for Ducati Monster by DUCABIKE. Gives a cosmetic flare to the bike as well as some practical uses like changing your clutch plates on the go without having to remove the entire oil bath. Saved $600+ worth of labor at the dealership. Honestly the hardest part was removing the OEM cover. All in all, it was a fun job and seeing it all come together in the end was very fulfilling. First ride out the next day had heads turning, it's a head-turning mod if you will. :P

Vehicle:
2018 Ducati Monster 1200 S
---------------------------------------------------------------------------------------------------------------------------
Parts:
DucaBike Oil Bath(Black)/Clear window+rim(black)
DucaBike Pressure plate(Gold)
DucaBike Pressure inner ring(Black)
---------------------------------------------------------------------------------------------------------------------------
Tools used:
5mm T-handle
4mm T-handle
5mm allen head bit with a step down adapter
10mm socket
3 lb rubber mallet
20mm bearing remover
Torque wrench(make sure yours goes to 10nm)
Liquid Gasket rated for correct temperature
Torch lighter
Needle-nose pliers
3M absorbant pads
Blue thread locker
Lintless cloth
---------------------------------------------------------------------------------------------------------------------------