THE WORLD’S FINEST TIG PEDAL BUILD! - DIY BETTER THAN NOVA OR SSC !

In this video I will show you how I built a custom Tig Pedal that you can build in your own shop with just hand tools and a drill press. I built it out of 1/8" aluminum but you could easily do the same design out of 18 ga. steel and just have someone bend the sides for you or just weld the sides on at 90 degrees.

If you decide to build a pedal for your Yeswelder Tig, here is a link to my drawing for the plug pin outs on the pedal for the Yeswelder Tig. https://drive.google.com/file/d/1rXNV...



The parts I used in this build are as follows.

Capacitor for potentiometer https://www.amazon.com/gp/product/B00...

long shaft potentiometer 10k https://www.ebay.com/itm/10K-OHM-2-WA...

Micro switch with roller https://amzn.to/2XUfiuw

Geared Timing pulley GT2 30 tooth https://amzn.to/2XSuUie

Timing belt https://amzn.to/3qxeOXt

Cable protector gland nut https://amzn.to/38Wh2tx

1/4" extension spring https://amzn.to/3iqwMIl

Torsion spring for actuator bar https://amzn.to/36akYW3

18ga-5 wire cord https://amzn.to/3o5npzj

3/8" shoulder bolts 5 pack https://amzn.to/3sAe7yt

1/4" shoulder bolt https://amzn.to/3sGc0tg

1/4" I.D. bronze sleeve bearing https://amzn.to/2XSpO5B

3/8 roller bearing https://amzn.to/3sxdplL

1/4" roller bearing https://amzn.to/3nRpdeY

These are through amazon and if you purchase through them it gives me a commission and doesn't cost you any more than normally. It helps me fund these projects and keep building cool stuff. many of these you may be able to find locally for cheaper prices if you have a larger hardware store that carries this types of parts.
Thanks,
Don