How to Replace Dual Radiator & Condenser Fan Assembly 2003-2007 Honda Accord

Buy Now!
New Dual Radiator & Condenser Fan Assembly from 1AAuto.com https://trq.video/ia-1ARFA00231

This video shows you how to install a new radiator fan from TRQ that is engineered to fit your 2003-2007 Honda Accord. Radiator cooling fans keep air flowing over the radiator when the vehicle is stopped or moving slowly. They are an important piece of your vehicle’s cooling system. If yours is failing, or broken, you should replace it immediately to avoid overheating and causing more damage to your vehicle.

This repair was done on a 2006 Honda Accord EX 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord

Tools you will need:
• Pocket Screwdriver
• 10mm Socket https://trq.video/oboe-1AXAA00017
• Coolant Funnel Set
• Ramps
• Trim Tool Set https://trq.video/oajv-1AXXX00006
• Pliers
• 3/8 Inch Drive Ratchet https://trq.video/obIT-1AXAA00015
• Gloves https://trq.video/oauj-1AXSS00048
• Safety Glasses
• Drain Pan

Subscribe:    / @trq  

Check out our playlist:
Honda Accord 2003-2007 7th Gen:    • Honda Accord 2003-2007 7th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.