Скачать или смотреть Building a DIY 8'x8' weightlifting platform and attaching Rogue R-3BT 30" timelapse

Timelapse of my DIY weightlifting paltform project.

Includes building the base, cutting the mats, screwing everything together and attaching the Rogue R-3BT 30".

Process:
1) Lay down first layer of 4'x8' plywood parallel to desired lifting direction
2) Lay down second layer of 4'8' plywood perpendicular to first layer
3) Screw together first two layer with a few screws in each piece
4) Cut first 4'x6' mat in half, making 2 2'x6' mats
5) Place mats and hardwood 4'x8' on top of plywood base. Mallet together to be even with edge into desired location.
6) Screw in a few screws to hold 2'x6' mats in place and hardwood in place. (just a few screws right now in case you need to adjust)
7) Cut second 4'x6' mat into 2 2'x2' pieces. Cut 2'x4' piece, then cut that in half.
8) Mount both 2'x2' pieces in remaining area and ensure good fit.
9) Attach everything with screws now that it's in the right position. Use 2.5" screws with washers on mat and without washers on hardwood.
10) Place R3 rack on platform.
11) Loosen top bolts (free up uprights to move bottom