Review - 2.4G 4CH Micro Low Voltage DSM2/DSMX Compatible Receiver Built-in Brushed ESC

Radio Control Videos, Tips, Reviews, Tutorials, and more.
Beginner to Advanced, we have something for everyone.

Gain the Knowledge, Feel the Passion!

Consider Supporting Our Channel by becoming a Patron at:   / groundcontrolrc  

Patrons of the Channel will have access to Exclusive Content!

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

2.4G 4CH Micro Low Voltage DSM2 DSMX Compatible Receiver Built-in Brushed ESC
https://www.banggood.com/2_4G-4CH-Mic...

HobbyKing™ HK-5320S Ultra-Micro Digital Servo 0.075kg / 0.05sec / 1.7g
https://hobbyking.com/en_us/hk-5320-u...

Turnigy MultiStar Race Spec 7A BLHeli-S ESC 1~2s (Opto)
https://hobbyking.com/en_us/blheli-s-...

Pololu Adjustable Step-Up/Step-Down Voltage Regulator S7V8A
https://www.pololu.com/product/2118

Visit Our Youtube Channel For More Videos and Information:    / groundcontrolrc  

Follow us on Facebook:   / ground-control-rc-1805295043132721  

Thanks for watching, please give a THUMBS-UP and don't forget to SUBSCRIBE.

Ground Control RC [ Review Series ]

[ Review - 2.4G 4CH Micro Low Voltage DSM2/DSMX Compatible Receiver Built-in Brushed ESC ]

I ordered one of these for a "Glue & Fly Series" Micro Trainer Plane I'm going to build and also to convert the WLToys F949 Cessna 182 to a Brushless System.
I tested it first with a Brushed Motor and it worked fine, however, I had to set the throttle trim nearly to the bottom to keep the Brushed Motor from spinning up immediately. After that it worked fine.
I then tested it with some Micro Servos I ordered and a Brushless Motor & Prop.
This tiny Receiver works great and I have already performed a field test with 7 flight.
I was flying out to a max range of approx. 125-150 meters and had no issues.
I will be ordering more of these ;-)
Links to the receiver, servos, ESC, and BEC are all above.

Here is a link to the Field Test of this Receiver:    • Видео  

Build, Fly, Crash, Repair, Rinse & Repeat!

Happy Flying!


What's in the Box:

1x receiver


Description:

Item Name: Receiver
Channel: 4
Input Voltage: 3V - 5.5V
Weight: 1.4g
Dimension: 21.3x11.9x5.8mm
Connector Size: JST 1.0mm
Socket Size: 1.25mm 2P


Features:

Compatible with DSM2/DSMX transmitter.
Bulit-in 2A brushed ESC,supported external brushless ESC, no need to program.
The receiver signal can stay stable even if the voltage is 2.5V.
Improve signal interruption problem when micro receiver using a conventional 1S brushless motor.



Legal

Ground Control RC™ and "Glue and Fly™" Series Aircraft. All rights reserved. Publication, reproduction or distribution of this Video/Media by any means whatsoever, including but not limited to, electronic transmission via internet or e-mail, re-uploading existing Videos/Media on any other website is strictly prohibited without the prior written consent of Ground Control RC. We are not directly affiliated with any of the vendors or manufacturers that may be referenced in our videos. Ground Control RC is not liable for any damage or loss through the use of products or techniques shown in any of our Videos/Media and you do so at your own risk! This Video/Media and all Ground Control RC Videos/Media are intended for entertainment purposes only.