Скачать или смотреть attiny85 blink led project 1

This is a project I made up using an ATTINY85 microcontroller that I programmed with a Mini Nano V3.0 ATmega328P Microcontroller Board.

The program is a simple BLINK program that blinks an LED on and off to whatever speed you choose, fast, slow, whatever. I have it blinking fast.

The ATTINY85 microcontroller can only work on 5 volts, more than 5v and it will "burn up". The LEDs need 12 volts to work so I had to incorporate a Power MOS Transistor Driving Controller Module FET Trigger Switch Drive Board.

This board will work off of 5 volts or higher and will send the full 12v to the white LEDs that we want to work. This board has 2 MOSFETs that allow this to happen. When the board is given 5v, from the attiny85, it turns on and off the 12v LED's controlled by the blink program stored in the ATTINY85.

I will eventually use a Perma-Proto Quarter-Sized Breadboard to solder it permanently and use it on my Harley Davidson to give a heads up to cars making turns in front of me on the Harley,
just a fun project to try.

If you see something I am doing wrong please advise, I'm a newbie to electronics.