How To Street Tune Part 2 Hondata S300 Reading Logs

Today we are showing you how to load a datalog and review it.

**Start with a conservative map**
*Only add timing on a dyno or with extensive knowledge on how to read spark plugs*

Link To Basemaps:

https://mailchi.mp/5e2c11feafe4/best-...

All Motor Basemap Setup:

Stock 240cc Injectors
Stock Map Sensor
2-Step
Shift Light 7500RPM
Rev Limiter 8000

To start tuning you need: (1)Hondata S300 Installed in a Vtec ECU. (1) Wideband (1)Be comfortable cutting 1 wire and joining it to a new wire.

Hondata S300 + ECU Combo from HA Motorsports On Our Website below:

https://kugantuning.com/products/ha-m...

You can monitor your Air/Fuel Ratio using this AEM X Series Wideband: (The 0-5v White Wire should be connected to OBD1 ECU Pin D14) (Do not splice)

https://kugantuning.com/product/aem-x...

Follow and subscribe to us below on our social media platforms.

IG ~   / kugantuning  
Twitter ~   / kugantuning  
Youtube ~    / @kugantuning  

You can download Hondata S300 Smanager from Hondata below

https://www.hondata.com/?_route_=soft...

POPS & BANGS READ HERE
Use the overrun fuel table settings in Parameters / TPS & Parameters / TPS IGN