Скачать или смотреть DIY: Beaded fish charm

Welcome to this new DIY video!

What do you need:

Flat beads
Rocailles in 6 colours
Artistic wire, 28 gauge
Scissors

Step 1:
Cut a piece of artistic wire approximately 60 cm long.
Step 2:
Fold your wire in half.
Step 3:
Thread two light pink beads onto the wire.
Step 4:
Then thread two green beads and an orange bead onto the right wire.
Step 5:
Thread the left wire through the beads in the opposite direction and pull both wires tight.
Step 6:
Thread two orange beads and two green beads onto the right wire.
Step 7:
Thread the left wire through the beads in the opposite direction and pull both wires together.
Step 8:
Thread three orange beads, one flat bead, and one black bead onto the right wire.
Step 9:
Throw the right wire back through the flat bead to create a loop.
Step 10:
Then, thread two more green beads onto the right wire.
Step 11:
Thread the left wire through the two green beads and then through the three orange beads in the opposite direction, pulling both wires tight again. Bend the fish's loop outwards.
Step 12:
Thread three orange beads, one gold bead, and two green beads onto the right wire. Pass the left wire through the beads opposite and pull both wires tight.
Step 13:
Repeat step 12 twice.
Step 14:
Now, thread three orange beads, one gold bead, and one green bead onto the right wire. Pass the left wire through the beads in the opposite direction.
Step 15:
Thread two orange beads, one gold bead, and one green bead onto the right wire. Pass the left wire through the beads opposite and pull both wires tight.
Step 16:
Thread one orange, gold, and green bead onto the right wire, and pass the left wire through the beads in the opposite direction.
Step 17:
Thread one orange and one gold bead, pass the left wire through the beads in the opposite direction, and pull both wires tight.
Step 18:
Thread two gold beads onto the right wire and one gold bead onto the left wire.
Step 19:
Pass the left wire through the first bead on the right wire in the opposite direction and pull both wires tight.
Step 20:
Thread five pink beads onto the right wire and pass the wire back through the bottom four beads to create the first fin.
Step 21:
Pass the right wire through the middle gold bead and then down through the left gold bead.
Step 22:
Thread five pink beads onto the left wire and pass the wire back through the bottom four beads to create the second fin.
Step 23:
Pass the left wire through the middle gold bead and then down through the right gold bead.
Step 24:
Now, do the same for the other half, but in reverse. Follow the fish's colour pattern!
Step 25:
Pinch the two halves together and thread the wire through the loops on the side of the fish. Do the same on the other side.
Step 26:
Twist both wires together and cut off the wire.
Step 27:
Bend the twisted piece of wire inwards.
Step 28:
Insert the jump ring through the lip of the fish.