Скачать или смотреть Fixing The Squeaky Seat Sliders and Bucket Seat Install Tips - 2015 Subaru WRX

IG: RacecarWRX
  / racecarwrx  

In this video I remove the squeaky seat sliders and replace them with a warranty set sent to me from Sparco. While this video is about removing seat sliders, I briefly cover how to install an aftermarket bucket seat in the VA WRX/STi chassis.

To keep the SRS light from coming on, you will need a 3.3 ohm resistor. I also suggest using a rear seat belt receiver for the front seats. The rear seat belt receivers are on nylon straps, that provide additional angle adjustment. The stock front receives are on metal brackets, and generally are too long. You can reuse the stock front receivers with a dummy seat belt clip to let the car know you have your seat belt buckled.

Passenger seats will also require the occupancy sensor to be transfer to the bucket seat. The sensor is found on the base foam of the passenger seat. Be very careful when removing the sensor, it is very easy to damage. You can also try to purchase the base seat from a vendor on ebay and avoid messing with your stock seats.

3.3 ohm Resistor: https://amzn.to/2VGWYFE
Dummy seat belt buckle: https://amzn.to/3rySuhp
Planted Seat Base Driver Side: https://amzn.to/2ZKb6NI
Planted Seat Base Passenger Side: https://amzn.to/2DFJ9xh
Sparco Side Mount Brackets: https://amzn.to/2ZMdmUx
Sparco Slider Rails: https://amzn.to/2Y26hxL

If you have any questions, please do not hesitate to ask.

**Note the above links are amazon affiliate links. If you purchase using the links above, I do get a portion of the profits from the sale