BMW N54 Cam Ledge Tray Replacement & Seal Upgrade DIY

In this video I show you how to remove and install your cam bearing ledges.

You can follow this DIY if you are looking to upgrade from metal rectangular sealing rings to the plastic or Teflon seals that will not eat into your cam tray.

You would do this if you are getting Vanos codes due to oil pressure loss at the seals on the bearing ledges.

My valve cover gasket DIY video I referenced can be found here:

   • BMW N54 Valve Cover Gasket DIY  

If you want to follow along and purchase the cam lock tool you can do so here (affiliate):

https://amzn.to/326ravh

Here is a link to the flywheel lock tool (affiliate):

https://ebay.to/347vM73

Here is a link to purchase a kit to replace this hardware (affiliate):

https://bit.ly/2Fw345H

If you would like to support the channel you could do so here:

https://www.paypal.com/paypalme/vehic...

If this is the first video you are catching of mine please consider subscribing. I upload regularly.

Thanks for watching :) When you see the word "affiliate" listed beside any link in my description please know that this is a custom link and I will earn a small commission if you opt to purchase using said link. This is at no extra cost to you so it's a win all around :) Thank you!