Infotainment Install Instructions

Tempered Glass Infotainment Screen Protector Installation

To install your Mobile Clear Shield Tempered Glass Infotainment Screen Protector, you'll need a spray bottle with a 30% alcohol and 70% water solution, a clean microfiber cloth, a felt-edged squeegee, a dust remover, and your precision-cut screen protector.

Step One: Clean the screen and surrounding area. Spray the alcohol solution onto the cloth, not directly on the screen. Wipe the surface thoroughly.

Step Two: Remove the protective film from your vehicle's screen. Be aware that static cling can attract dust, so work quickly.

Step Three: Use the adhesive dust remover to pick up any particles. Move swiftly to prevent dust from settling again.

Step Four: Once dust-free, remove the film from the back of the screen protector using the tab on the upper right corner.

Step Five: Carefully center and align the protector on all sides. Use your finger to press into the middle to secure it in place.

Step Six: Use the squeegee, starting from the center and pushing towards the corners, to remove any bubbles. You may need to use the corner of the squeegee to work in tight areas as needed.

Your screen is now perfectly protected.