How To Make The Sweet Pea Stabiliser Holder

All Sweet Pea Links: https://linktr.ee/swpea.machineembroi...

Design: https://swpea.com/products/stabiliser...
This design also comes free with the full stabiliser collection: https://swpea.com/products/full-stabi...

Make a hanger to store your stabiliser rolls in and make it easier to tell them apart by sorting them by their types. This is a ITH in the hoop machine embroidery design.

PLEASE NOTE: This is just the stabiliser holder design, it does not include any stabilisers or physical materials. The design also included for free within our "Full Stabiliser collection" which can be found at the link below:

The hanger requires 13 hoopings in total for the same size shown in our sample but you could extend it or reduce it to suit your needs. There is one panel for each type of stabiliser as well as a base panel (makes 2 bases per hooping). For the back panels we repeated the front blocks but left off the text.

The panels are then joined together using a sewing machine.

Finished Dimensions (approx.) using five storage compartments:

73cmL x 24cmW x 6cmD (29” x 9” x 2 ½”)
Full photo instructions and directions are included with your purchase.

It is our intention to offer you the best service always and for our designs to be the highest quality in the market.

Designs are provided in 9 different embroidery formats. The formats included are: DST, EXP*, HUS, JEF, PEC, PES, VIP, VP3 and XXX.
*BMP and INF files are also provided, these are recommended to be used with the EXP files for Bernina machines.

SVG files are included for cutting machines. Please note the SVG format can be converted to FCM within the Brother Scan n Cut software if required.

Sweet Pea Machine Embroidery Designs Cutting Files Disclaimer - click here
Instructions are provided in English.